Find an equivalent to your current load cell
Enter the model you use today. We will return a parameter-by-parameter comparison and flag anything that differs, including whether your drawing needs to change.
All available cross-references
Every comparison below is generated from published specification sheets. Where a figure differs, we state the difference rather than rounding it away.
HBM Z6-C3-50KG → SP-50Equivalent single-point cell. Same M6 threaded mounting and same hole pitch, so no drawing change is required.
Equivalent single-point cell. Same M6 threaded mounting and same hole pitch, so no drawing change is required.
| Parameter | HBM Z6-C3-50KG | SP-50 | Difference |
|---|---|---|---|
| Capacity | 50 kg | 50 kg | Same |
| Sensitivity | 1.0 mV/V | 1.0 mV/V | Same |
| Accuracy class | OIML C3 | OIML C3 | Same |
| Combined error | ≤ 0.03 %F.S | ≤ 0.02 %F.S | Improved |
| Creep (30 min) | ≤ 0.03 %F.S | ≤ 0.015 %F.S | Improved |
| Temp. effect on zero | 0.03 %F.S / 10 °C | 0.02 %F.S / 10 °C | Improved |
| Protection class | IP65 | IP65 | Same, IP67 optional |
| Mounting | M6 threaded | M6 threaded | Same hole pitch |
| Cable | 3 m | 3 m standard | Custom lengths available |
Zemic L6W-C3-50KG → SP-50Equivalent single-point cell with the same threaded mounting. Verify the cable length on your BOM before ordering.
Equivalent single-point cell with the same threaded mounting. Verify the cable length on your BOM before ordering.
| Parameter | Zemic L6W-C3-50KG | SP-50 | Difference |
|---|---|---|---|
| Capacity | 50 kg | 50 kg | Same |
| Sensitivity | 1.0 mV/V | 1.0 mV/V | Same |
| Accuracy class | OIML C3 | OIML C3 | Same |
| Combined error | ≤ 0.03 %F.S | ≤ 0.02 %F.S | Improved |
| Protection class | IP65 | IP65 | Same |
| Mounting | M6 threaded | M6 threaded | Check thread depth |
Interface 1022 → SB-200Shear beam equivalent for platform scales. The mounting style differs — check the baseplate geometry before switching.
Shear beam equivalent for platform scales. The mounting style differs — check the baseplate geometry before switching.
| Parameter | Interface 1022 | SB-200 | Difference |
|---|---|---|---|
| Capacity | 200 kg | 200 kg | Same |
| Accuracy class | OIML C3 | OIML C3 | Same |
| Combined error | ≤ 0.03 %F.S | ≤ 0.02 %F.S | Improved |
| Protection class | IP65 | IP67 | Improved |
| Mounting | Single-ended shear | Single-ended shear | Verify rocker pin position |
Technical reference only. The compared model names are the property of their respective manufacturers. This page is an independent parameter comparison and does not imply any affiliation, endorsement or sponsorship. Figures are taken from published specification sheets; confirm against the manufacturer's current datasheet before committing to a design change.
Common questions
Can you supply a drop-in replacement for my current load cell?
For many models, yes. We compare capacity, sensitivity, accuracy class, combined error, creep, temperature effect, protection class, mounting interface and cable length. Where the mechanical interface is identical we say so explicitly, and where it differs we flag it so you know whether your drawing needs to change.
Is this an affiliated product?
No. This comparison is a technical parameter reference only. We are not affiliated with, endorsed by or connected to the manufacturer of any compared model.
Will I get a per-unit calibration certificate with the sample?
Yes. Every sample ships with its individual calibration certificate, so you can verify the actual cell against the datasheet on your own bench rather than taking our figures on trust.